EGM-10T-4-7C AUSLUBE PUMP

Small and low-cost main piping with pressure relief action, filling type oil and grease electric pump.
  • Detailed Description
Product Introduction

Small and low-cost main piping with pressure relief action, filling type oil and grease electric pump.

 

Product parameters
Emissions 10ml/min
Discharge pressure 10MPa(Set pressure of safety valve)
Source DC24V
  Motor Pressure reducing solenoid valve Whole
20W/0.8A 26W/1.1A 46W/1.9A
Maximum discharge time The power on time should not exceed seven minutes
Distribution rate Less than 25% (20 ℃)
Ensure lubricating grease AUSLUBE PUMP MP0、FS2、MT1
Ink cartridge size 200ml、400ml、700ml Ink cartridges
Weight 1.8 kg (4C), 2.8 kg (7C)
Pressure release Built in solenoid valve
CE approval yes
 
Instructions for use
● Use the specified model of lubricating grease from AUSLUBE.
● Do not use lubricating grease containing molybdenum disulfide.
● When using non lubricating original lubricating grease, please be sure to consult.
● Do not use any lubricating grease that contains corrosive brass and rubber substances.
● When replacing ink cartridges, be careful not to let foreign objects enter.
● Avoid continuous operation.
● After re inflating, always press the deflate button to clear the air.

Our company has been specializing in the maintenance and upkeep of lubrication systems for many years, accumulating rich practical experience. Relying on our own technology and learning from the characteristics of lubrication systems in Europe, America, and Japan, we have continuously improved and developed this high-quality plunger lubrication pump.